0
£0.00
|
Specifications |
||
| Part ID: | TS5623HD |
|
| Materials: | Delrin | |
| Size: | 88mm L x 27mm Diameter | |
| Weight: | 118g (0.26lb) | |
| Viscosity Range: | 1 - 50,000 CPS | |
| Flow Rate (water): | 7250ml/minute @ 100 psi | |
| Max Fluid Pressure: | 70 psi ( 5 Bar) | |
| Activation: | Hand Lever | |
| Material Inlet: | 1/8" NPT | |
| Material Outlet: | 1/8" NPT | |
| Lead Time: | * Ships in 2-3 Business Days | |
The TS5600 Series dispense valve systems accurately control the application of most low to medium viscosity fluids. The unique seal-less design incorporates an inert polymer diaphragm that isolates the actuator from the valve. Model TS5623HD with Delrin polymer wetted parts is used for dispensing solvents, adhesives and UV Cure materials. This version is a manual hand held valve (non timed) that will accept a direct feed of adhesive or liquid from a pressure pot. (Please note that picture shows white Teflon version. Delrin version is black).
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
