0
£0.00
The TS5600 Series dispense valve systems accurately control the application of most low to medium viscosity fluids. The unique seal-less design incorporates an inert polymer diaphragm that isolates the actuator from the valve. Valve open time can be as short as 15 milliseconds. The adjustable open/close stroke 0.13 to 0.64 mm (0.005" to 0.025") means very fast response and positive shutoff. Model TS5622VU with UHMW* polymer wetted parts is used for dispensing solvents, cyanoacrylates, anaerobics and fluxes. Simple to use with TS500R, TS250, TS350 digital timed controllers.
*Ultra High Molecular Weight polyethylene.
Part ID:
TS5622VU
Materials:
UHMW, Teflon®
Size:
76mm L x 27mm Dia.
Weight:
118g (0.26lb)
Viscosity Range:
1 - 50,000 CPS
Repeatability:
±0.56%
Cycle Rate:
Up to 500 cycles/ minute
Flow Rate (water):
7250ml/minute @ 100 psi
Min Shot Size:
0.0075 cc/ ml
Max Fluid Pressure:
70 psi ( 5 Bar)
Activation Pressure:
70 psi (4.8 bar) minimum
Material Inlet:
1/8" NPT
Material Outlet:
1/4-28 UNF
Mounting:
10-32 UNF
Lead Time:
* Ships in 1-2 Business Days
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
n
Datasheet
94k
