0
£0.00
Datasheet
94k
The TS5600 Series dispense valve systems accurately control the application of most low to medium viscosity fluids. The unique seal-less design incorporates an inert polymer diaphragm that isolates the actuator from the valve. Valve open time can be as short as 15 milliseconds. The adjustable open/close stroke 0.13 to 0.64 mm (0.005" to 0.025") means very fast response and positive shutoff. Model TS5621HD with Delrin wetted parts is used for dispensing solvents, UV cure, anaerobics and fluxes. Simple to use with TS500R, TS250, TS350 digital timed controllers.
Part ID:
TS5621HD
Materials:
Delrin, Teflon
Size:
61mm L x 24mm Dia.
Weight:
59g (0.13lb)
Viscosity Range:
1 - 50,000 CPS
Repeatability:
±0.30%
Cycle Rate:
Up to 500 cycles/ minute
Flow Rate (water):
3432ml/minute @ 100 psi
Min Shot Size:
0.0075 cc/ ml
Max Fluid Pressure:
70 psi ( 5 Bar)
Activation Pressure:
70 psi (4.8 bar) minimum
Material Inlet:
1/4-28 UNF
Material Outlet:
1/4-28 UNF
Mounting:
10-32 UNF
Lead Time:
* Ships in 2-3 Business Days
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
