TS5322D Spool Valve

Designed to dispense medium to viscous materials fed from syringes, cartridges or pumps.  The TS5322 provides repeat deposits of sealants, silicones, RTV, grease and pastes.  TS5322 valves are approximately 4.0" (101.6mm) long and 1.38" (35mm) wide.  They weigh approx. 0.31 lbs (141g).  The minimum operating air pressure required is 70 psi.  Flow rates (water) are approx. 2700cc/ml gallons per minute @ 100psi (maximum free flow area is measured without dispense tip adapter, which creates reduced output area).  The minimum shot size for the valve is approximately 0.002 cc/ml and these valves will cycle up to speeds of 700 deposits per minute.  The viscosity range of fluid is recommended at between 5000 - 1 Million CPS.  The maximum fluid pressure is 500psi.  The repeatability is ± 0.2%. Recommended digital timed controllers for these valves are the TS250, TS350 and TS500R.

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.