TS2205 Pressure Pot 0.5 litre

TS2205 reservoir tank for all low to medium viscosity fluids. Can accept 250gm and 500gm bottles of cyanoacrylate, anaerobic and UV cure or fluid can be poured directly into chamber with a liner. Four threaded knobs secure the lid which is easily removed for cleaning.  Includes an air port to pressurise the tank, and a pressure relief valve with quick release. Comes with top ported male luer lock outlet connector and dip tube for use with standard fluid lines.  Complete with 0-75 psi (0-5 BAR) adjustable air regulator, tank lid o-ring, clear and black fluid lines.  Stainless steel body with aluminium lid. 88mm diameter x 122mm high. Inner chamber 82mm diameter x 115mm high. 1.7 kg weight.  For use with all flowable materials that require 75 psi or less to dispense. Includes dispensing solder masks, solvents, inks, primers, activators, superglue, thread locks.

Operation

Open the reservoir and place inside a 250 gram or 500 gram bottle of cyanoacrylate, anaerobic, UV or other adhesive. Alternatively, pour on the fluid directly into the chamber using a liner. Place the tank lid back on and position the dip tube inside the adhesive bottle or below the fluid level.  Screw back the threaded knobs tightly. Attach the fluid line to the luer lock adapter on the tank lid. The other end will connect to any of our metering valves.

Use a TS918-46L liquid manifold to use up to 4 dispensing valves simultaneously from the same pressure pot. If purchased with the TS1201 pen valve, includes clear and black fluid lines, spare pinch tubes and needle tip assortment.  Please note, we hold most items in stock but please allow 5 days for delivery or phone us for specific stock levels.