0
£0.00
The TS1201 Dispensing Pen uses a disposable moulded tube assembly. Designed to handle a wide variety of low to medium viscosity fluids – from adhesives and lubricants to sealants and masks. Gravity or pressure fed, the pen is ideal for controlled rates of dispensing. Includes pre-assembled applicator pen, pinch tube assemblies, an assortment of disposable dispensing tips and a 24" hose.
TS1215 Pressure pot for most low to medium viscosity fluids. No pouring needed; you just drop the bottle right into the tank, seal with wing nuts, and pressurise. Includes an air port to pressurize the tank, and a pop-off valve set at around 75 psi for safety. Accepts adhesive bottles 250gm and 500gm or containers placed inside the chamber or use fluids direct in any can or bottle. Easy connect to any air supply. Features built-in adjustable 0-60 psi regulator and gauge.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
| Part ID: | TS1215-1201-1 |
| TS1201 Size: | 127mm L x 34mm D |
| TS1201 Weight: | 36 g |
| TS1201 Wetted Parts: | Polyethylene |
| TS1201 Viscosity Range: | 1 - 45,000 CPS |
| TS1201 Flow Rate: | 0.54 GPM @ 60 psi (water) |
| TS1201 Max Fluid Pressure: | 60 psi ( 4 Bar) |
| TS1201 Material Inlet: | Female Luer Lock |
| TS1201 Material Outlet: | Male Luer Lock |
| TS1215 Outer Size: | 4.50" W x 7.00" High |
| TS1215 Inner Chamber: | 4.00" W x 6.00" High |
| TS1215 Weight: | 2.5kg |
| TS1215 Viscosity Range: | Liquids up to 30,000 CPS |
| TS1215 Max Fluid Pressure: | 60 psi ( 4 Bar) |
| TS1215 Air Inlet: | 1/4" thread inlet (to regulator) |
| TS1215 Liquid Outlet: | 3/16" male luer lock to fluid line |
| TS1215 Materials: | Galvanised steel body, PE dip tube |
| Lead Time: | * Ships in 1-2 Business Days |
 TS1201 Datasheet 60k TS1215 Datasheet 60k |
