TS1201 Hand Operated Pinch Valve with 1 Liter Pressure Pot

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

Part ID:	TS1251-1201-1
TS1201 Size:	127mm L x 34mm D
TS1201 Weight:	36 g
TS1201 Wetted Parts:	Polyethylene
TS1201 Viscosity Range:	1 - 45,000 CPS
TS1201 Flow Rate:	0.54 GPM @ 60 psi (water)
TS1201 Max Fluid Pressure:	60 psi ( 4 Bar)
TS1201 Material Inlet:	Female Luer Lock
TS1201 Material Outlet:	Male Luer Lock
TS1215 Outer Size:	6.00" W x 9.50" High
TS1215 Inner Chamber:	5.00" W x 7.50" High
TS1215 Weight:	3.5kg
TS1215 Viscosity Range:	Liquids up to 30,000 CPS
TS1215 Max Fluid Pressure:	60 psi ( 4 Bar)
TS1215 Air Inlet:	1/4" thread inlet (to regulator)
TS1215 Liquid Outlet:	1/4" OD or 1/8" male luer lock to fluid line
TS1215 Materials:	Aluminium body and 6-6 Nylon (top and base)
Lead Time:	* Ships in 5-7 Business Days
	TS1201 Datasheet 60k TS1251 Datasheet 60k

The TS1201 Dispensing Pen uses a disposable moulded tube assembly to handle a wide variety of low to medium viscosity fluids – from adhesives and lubricants to primers and masks. A hand held dispensing device, connected to a 500 gram pressure pot that can also accept bottles of Cyanoacrylate, Anaerobic and UV cure adhesives. System includes pre-assembled applicator pen, pinch tube assemblies, an assortment of disposable dispensing tips, a 36" hose, pressure pot with dip tube, built in adjustable 0-60 psi regulator wit gauge and a 1/4" air input connector.

The TS1251 pressure pot (max pressure 60 psi) is designed to accommodate all solvent and epoxy fluids, as well as cyanoacrylates and UV's. Pot accommodates 1/4" OD feed tubing with stainless steel compression fittings for a continuous fluid path from the reservoir inside the pot to the metering valve. Also supplied with a 1/8" male luer lock fitting to accept our standard fluid lines. Airtight seals ensure no leakage or air entrapment problems.  Ideal for use with bottles of cyanoacrylate and anaerobic adhesives. 60 psi safety pressure easily handles fluid with viscosity up to 25,000 cps. Air port quick connect fitting and top ported outlet.  Also accepts adhesive bottles 250gm and 500gm.  Easy connect with 6mm push fit to any adjustable air regulator.  Black and silver anodised aluminium.