0
£0.00
The TS1201 Dispensing Pen uses a disposable moulded tube assembly. Designed to handle a wide variety of low to medium viscosity fluids – from adhesives and lubricants to sealants and masks. Gravity or pressure fed, the pen is ideal for controlled rates of dispensing. Includes pre-assembled applicator pen, pinch tube assemblies, an assortment of disposable dispensing tips and a 24" hose.
The valve uses disposable pinch tubes either clear plastic or black (for UV cure adhesives). The tube features a male luer lock at the tip end (to accept any standard needle/ tapered tips) and a female luer lock connector the other end. This allows you to connect the valve to fluid lines and then to a pressure pot, cartridge reservoir or syringe feed. The valve is kept closed (pinched) until the lever is pressed which opens the tube to allow fluid flow. Once the lever is released, the spring loaded rod pushes against the tube to seal and stop fluid flow. Replacing the tubes are quick and simple. Tubes will operate many cycles before replacement is required. Needle tips are available to suit different types of liquid and adhesives. Use Teflon lined or Teflon for cyanoacrylates, General Purpose for other fluids and Tapered for more viscous gels.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
| Part ID: | TS1201 |
| Size: | 127mm L x 34mm D |
| Weight: | 36 g |
| Wetted Parts: | Polyethylene |
| Viscosity Range: | 1 - 45,000 CPS |
| Flow Rate: | 0.54 GPM @ 60 psi (water) |
| Max Fluid Pressure: | 60 psi ( 4 Bar) |
| Material Inlet: | Female Luer Lock |
| Material Outlet: | Male Luer Lock |
| Lead Time: | * Ships in 1-2 Business Days |
 Datasheet 60k |
