0
£0.00
Full A1 size extraction system unit for aerosol adhesives, lacquers, solvents, paints, solders, particles and dust. Spray adhesives, conformal coatings and paints, monomers, hazardous powders and particulates, resins, sealants, solders, light grinding particles, organic solvents and cleaners etc. Capture, contain, filter and expel for a cleaner, healthier working environment within electronic design and rework, dental/medical labs, pharmaceutical labs, design and technology, science in education and more.
The workstation hood also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc..
|
Specification |
||
| Part ID: | T930H-D |
|
| Fan Motor Spec: | 230V 50Hz 80W | |
| Air Volume at Free Air: | 710 m3/hr | |
| Air Velocity at Filter Face: | 0.60 m/sec | |
| Air Velocity at Hood Face: | 0.60 m/sec | |
| Noise Level: | 60 dB (A) | |
| Weight: | 60 kg | |
| Lead Time: | 5-7 days | |
|
Description Steel construction finished in dove grey - fan/filter unit mounted onto hood enclosure complete with clear polycarbonate panel and hood lighting - particulate filter - 2 centrifugal blowers, external rotor motor type, brushless, UL, VDE and CSA approved - sealed electrical wiring and switch, downstream of filter. 2 x Flexi-duct each 2 metres x 100mm dia. Operation
All WS filtration systems and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on. These units can be used in two positions. |
 |
|
Filtration The particulate (intake) filter is a three stage graduated fibre filter with a high 'dust' holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns. The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposures to potentially hazardous substances. These fume cabinets are designed for immediate operator protection whereby ‘large’ particulates (> 5 microns) are filtered out and ‘fine’ particulates (<5 microns) together with odours, gases, vapours and fumes within the hood enclosure are exhausted to atmosphere via the flexi-duct(s). Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH). |
