JGD7000-UV Diaphragm Valve Dispensing System for UV

UV Cure adhesive dispenser is designed to accept a 1 liter bottle of ultra-violet cure adhesives. There is no pouring needed (ie: you drop your 1 liter bottle of glue right into the dip-tube tank). Very little clean up is involved with this system and you do not smell the strong fumes of the glue as this is a contained system. The valve is designed to dispense thin and medium UV adhesives with precise deposits of glue with no dripping. The system has many ways to control the deposit: -needle size, tank pressure, - timer length control, -valve fine stroke adjustment.

This system comprises of a valve, controller unit and pressure pot for applying UV cure adhesives direct from standard 1 litre bottles. Timed dispense systems provide savings. When applying adhesives by hand, it is slow and too much is often applied to each part which can create mess, waste and might damage some products. Or if too little adhesive is applied it can create a weaker bond and part failure. With our system, the adhesive bottle is placed directly inside the compact tank unit and fed under very low air pressure down flexible feed tubing to the stand mounted diaphragm valve. The controller unit is then set to make micro dots, shots or beads each time the foot pedal is pressed. Its very simple to operate and maintain because all wetted parts are designed for use with UV.

For UV's, dispensing tips are opaque plastics to prevent ligh affecting the adhesive. All feed tubing, fittings and connectors are black to prevent UV's being affected.

The systems comprises of a pressure pot to accept a 1 litre or smaller adhesive bottle. A digital timed controller/ dispenser and a diaphragm valve. And a benchtop stand to fix the valve in place for hands free dispensing. This dispensing system will ship with an extensive starter stock of dispense tips, caps and fluid lines. The requirements for this system are a compressed air supply of 70-100 psi and a power supply of 110 - 230 V AC.

Part ID: JGD7000-UV
Tank Unit: Up to 1 litre size
Controller Unit: Digital Timer 0.02-60 seconds adjustable
Dispense Valve: Up to 500 cycles/ minute
Warranty: 1 Year
Lead Time: Ships in 2-3 Business Days

Dispensing system is designed to handle Cyanoacrylate (CA) adhesives up to 40,000 CPS viscosity. For gels, please contact us for an alternative system.

Items are shipped in the UK by Interlink Express and next day tracked and insured service when in stock. For European deliveries, items are shipped via DPD Road or Air Express. For all international shipments, items are sent FedEx.

Air-Powered Dispensers * Industrial Dispensing Components * Precision Dispense Valve Systems * XYZ Bench Robots
Adhesives * Packaged Components * Techkits * RatioPacks * Hingepacks * Syringe Barrels * Cartridges * Nozzles