BVX-201 Dual Arm Bench Solder Fume Filtration System

The BVX-201 Fume Extraction System is a revolutionary two-arm unit that combines powerful fan performance with efficient filtration, quiet operation and complete portability. It can be placed under or next to the bench-top and is supplied fitted with two 50mm diameter x 710mm long BVX arms, extra 1.8m long hose, table bracket and clamps.

Using the proven fan motor of the BVX-100 Series Fume Extraction Systems, the BVX-201 adds a proprietary one-stage impeller design that doubles the total free-blowing airflow.

The result is a maximum free-blowing airflow of 250m3/h (150cfm), with a maximum suction force of 850 Pa (3.5"WC). This suction force provides ample capability in reserve to handle any clogging that may occur during the normal life of the filter. It is, in fact, the suction rating for this unit is one of the best in its class offered for such compact and portable systems.

The BVX-201 Fume Extraction System is designed mainly for solder fumes and incorporates both pre- and main-filters which can be changed independently to maximize the working life of each filter and lower the total cost of ownership. The main filter has a HEPA efficiency of 99.97% at 0.3 micron, plus an activated carbon filter to remove additional gases.

Powerful, Portable Fume Extraction

The new BVX-201 is a revolutionary two-arm filtration system that combines powerful fan performance with highly efficient filtration. The compact design and easy set-up make it truly portable.

Depending on the application, two filter configurations are offered: HEPA filtration for solder fumes and gas-phase filtration for the removal of gases from solvents, conformal coating, etc.

With a static pressure of 850 Pascal (3.5"WC) the filter unit delivers the suction force to assure a long filter lifetime and low operating costs. The air inlet ports allow the connection of 50 mm (2") or 63 mm (2.5") diameter exhaust arms.

Features and Benefits:

• Compact and portable
• High suction force and airflow
• HEPA efficiency at 99.97%
• Optional model with deep-bed gas filter
• Low noise level
• Connects to 50 mm (2") or 63 mm (2.5") diameter exhaust arms

Specifications                          BVX-201 / BVX-203

Static Pressure:                                    850 Pa  (3.5” WC)

Flow Rates (with HEPA):                     2 x 75 m3/hr  (45 cfm)

Noise Level:                                           < 55 dBA

Dimensions (WxDxH)                          508 x 254 x 388 mm (20" x 10" x 15.3")

Weight:                                                    9 kg (20 lbs) 

Voltage                                                    100-240 VAC

Frequency                                                50 – 60 Hz

Power                                                       85 Watt

Filter Unit Kit

BVX-201-Kit                          Filter unit with 2 flexible arms, Pre / HEPA / Gas

Systems:

BVX-201                                Filter unit for 2 stations, Pre / HEPA /Gas

BVX-203                                Filter unit for 2 stations, Pre / Deep-Bed Gas

Arm Kit:

BVX-Arm-K1                         1 Each BVX Arm 600 mm  (2’) long, with 1.8 m (6’) long hose and table bracket

Accessories:

BVX-Arm                                Arm flexible, 600 mm (2’) long,  ESD safe

BVX-ArmL                              Arm flexible, 1200 mm (4’) long, ESD safe

BVX-TB01                              Table bracket with 2 C-clamps

BVX-CH01                             Connection hose, 50 mm (2") dia., 1800 mm (6’) long

BVX-CH02                             Connection hose, 50 mm (2") dia., 3600 mm (12’) long

Replacement Filters:

FP-BVX200                            Pre-filter (Pack of 5)

FM-BVX200                            Main filter, HEPA 99.95% / Carbon

FG-BVX200                            Deep bed gas filter