700 Series Pistons

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

Pistons ensure that the pressure is evenly spread across the fluid surface to provide consistent dispensing. Wiper seal pistons prevent dripping and eliminate material waste by wiping the syringe barrel wall clean as fluid is dispensed. Maximum operating pressure is 100psi (6.9bar). Wiper pistons (white) are industry standard and a slightly tighter fit for use with low to medium viscosity fluids or with mechanical devices such as the TS700 series manual syringe gun to prevent leakage past the double wiping edges. "Easy Flow" pistons (blue) are recommended for most general applications and they ensure no material residue is left on the syringe barrel walls while dispensing. Straight wall pistons (red) are recommended for reduced stringing and "bouncing" with high viscosity products. Also available in bulk packs of 1000.